Reset/Change IP of ILO2 on a blade
Issue:
Sometimes the ILO IP Address doesnt get changed/refreshed after applying the changes on "Enclosure Bay IP Addressing" page.
In the above screenshot, the IP of the ILO of Bay2 is configured as 16.190.0.162, but sometimes the ILO (IP in the last column) would not acquire the IP configured.
Solution:
Open the ILO of the blade and then to Administration tab on the ILO window and click on network on the left pane. Try changing the IP and click the Apply button. That worked for me, and can see the
Issue:
Sometimes the ILO IP Address doesnt get changed/refreshed after applying the changes on "Enclosure Bay IP Addressing" page.
In the above screenshot, the IP of the ILO of Bay2 is configured as 16.190.0.162, but sometimes the ILO (IP in the last column) would not acquire the IP configured.
Solution:
Open the ILO of the blade and then to Administration tab on the ILO window and click on network on the left pane. Try changing the IP and click the Apply button. That worked for me, and can see the
No comments:
Post a Comment